Vacuum Tray Dryer Working Principle
Vacuum Tray Dryer is used mainly for drying high-grade, temperature, and oxygen-sensitive products. Vacuum Tray Dryer is highly suitable for drying hygroscopic substances, which are dried to very low residual moisture, content levels. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity.
It’s also suitable for drying thermal-sensitive materials that easily resolved, polymerized, or deteriorated under higher temperatures. Sterilization can be conducted prior to the drying process, during which no matter is allowed to enter the product. Static vacuum dryer eliminates the configuration damage of the drying materials, therefore widely used in pharmaceutical, chemicals, foodstuff, etc.
| SALIENT FEATURES – GMP Model : |
| · Main Body/Vacuum chamber SS316 with heavy-duty SS316 flange and Stiffeners. · Door SS 316 (Dish Curve shape) with heavy-duty SS316 flange. · Shelves Hollow Type pads SS316 with flow Baffles. · Condenser (Shell & tube type) and Receiver (Cylindrical / Bottom Cone type) in SS 304 with Isolation valve and Flow Glass in between to monitor condensation. · Trays (without back folding) in SS316 rounded corners and edges. · Explosion Vent / Rupture Disc on the vacuum chamber. · Digital Temperature Controller (FLP) with solenoid controlled Pneumatic operated valve at Hot Water inlet. · Provision for Validation Port on Body. · Digital Temp., Indicator (FLP) at H.W. inlet & outlet. · Dial type Vacuum gauge and Digital Temp., Indicator (FLP) in Vapor line. · Pressure release valve in Steam line. · View Glass/Light glass provided on vacuum chamber Door, Body, and Receiver. · Silicon transparent gasket for the door. · Nitrogen purging valve provided on the Vacuum chamber. · A vacuum break valve is provided on the vacuum chamber drain valve for the Vacuum chamber and Receiver. |
| Temperature Accuracy: _+ 2 to 3 deg C |
| FINISH: Internal 320 Grit Mirror Polish and Outer 180 Grit Mat Finish. |
| OPTIONS : |
| · Condenser and Receiver in SS 316 instead of SS304. · Limpet coil on the Vacuum chamber. · Limpet coil on the Vacuum chamber. · Hot water system (Steam heated) with the tank (Insulated), SS304 Steam Radiator / Electrical heaters, Circulation pump with FLP Motor and controls. · Insulation on the vacuum chamber outer surface (with/without) door. · The insulation is enclosed and covered with SS 304 sheet & polished to a matt finish. |
Email: For detailed inquiries or quotes, email us at: raviinternational01@gmail.com
Phone: Speak to a representative directly by calling: 91-9819030056
Online Form: Fill out below contact form for a quick response, and we’ll get back to you within 24 hours.
